DIGITAL CONTROLLER AND INDICATOR FOR HEATING OR COOLING WITH NATURAL DEFROST THROUGH COMPRESSOR SHUTDOWN

Periodical defrost may be performed with MT-512e 2HP by stopping the compressor (natural defrost) and forcing defrost manually. It is provided with a powerful 16Arelay for actuating loads of up to 2HP, in addition to a command output combined with a timer for programming refrigeration and defrosting times. Another feature available is the turning off of the control functions, making the MT-512e 2HP operate only as a temperature indicator. It is also provided with a configurable digital filter, which has the purpose of simulating mass increase in the environment sensor, thus increasing its response time, i.e., it renders the sensor response slower (delay). Through an intelligent function blocking system, it prevents unauthorized personnel from changing the control parameters. MT-512e2HPcan also be set for heating.

This product is CE, UL and NSF certified. According to UL laboratory tests, this product is also suitable for installations with R290 and R600a gases.

Evolution line products has a frontal IP-65 protection, Flatec key for easy access, four digits display and exclusive accessories* as the key programmer EasyProg and the protective case Ecase.

* sold separately

nbsp;

Technical Specifications:

Power supply: 115 or 230 Vac plusmn;10% (50/60 Hz) *

Control temperature: -58F to 221F (-50C to 105C) **

Operating temperature: 32F to 122F (0C to 50C)

Resolution: 0.1C

Maximum load current: 16 A for resistive-type loads and 12 A for inductive-type loads

Maximum load power: 2HP ***

Protection level: IP 65 (frontal)

Operating humidity: 10 to 90% RH (without condensation)

Dimensions: 71 x 28 x 71 mm

(*) Admissible variation in relation to the voltage rating

(**) This instrument measures and controls temperatures of up to 200C/392F, using the silicone sensor cable SB59 (sold separately).

(***) For higher loads, use contactor.